Cisco APIC Managed Object Browser (Updated)
An APIC embedded graphical tree tool for browsing the APIC configured object model.
Featured
Cisco ACI Inband Management
I have seen various ACI inband management documents which cover this topic but yet to find one with all the required information with the additional EPG’s for access to vCenter, Continue Reading →
Featured
Understanding Cisco ACI APIC L3Out Subnet Options
Layer 3 External Routing or L3Out’s are a “bread and butter” requirement for designing and building Cisco ACI networks. This blog is a companion document to the blogs on different Continue Reading →
Featured
Cisco ACI Multi-Pod (Pt.1) – IPN (Inter-Pod Network) Configuration & Verification
Inter-Pod Network (IPN) Topology This post is the first in a three part (part two here) series on configuring Cisco ACI MultiPod and is based upon experiences from a number Continue Reading →
ACI Route Leaking Host Addresses
When we route leak networks between VRFs in ACI prior to version 3.x we needed to ensure that we moved the subnet configuration from the bridge domain to the EPG Continue Reading →
Ansible Tower REST API Part 2
This is the second in a two part blog on the basics of using the REST API with Ansible Tower to configure the Cisco ACI APIC. You can find part Continue Reading →
Ansible Tower REST API Part 1
This post is about the basics of using the Ansible Tower REST API with code from real world deployments, part two is here. At Haystack Networks, we have deployed Ansible Continue Reading →
Cisco ACI Static Port Assignment Methods
There are a few ways to assign Cisco ACI leaf switch ports for use by endpoints in endpoint groups each with its own pros and cons. This post discusses the Continue Reading →
Cisco APIC Embedded App – Managed Object Browser
The application has now been published at Cisco ACI App Center and can be downloaded from the Cisco ACI App Center here. The original application was blogged about here and allows the Continue Reading →
Cisco ACI Multi-Pod (Pt.3) – Fabric Discovery & Verification
In part one of this series we configured the IPN (Inter-Pod Network) for connecting the ACI fabrics in different pods. In part two of this series we configured the APIC Continue Reading →
Cisco ACI Multi-Pod (Pt.2) – APIC Configuration
This is the second part of the three part series on configuring Cisco ACI Multi-Pod. In the first part of this three part series we configured a redundant IPN (Inter-Pod Continue Reading →