CME Meetme

Configuring Meetme on CME

voice-card 0
dsp services dspfarm
!  # Create Conference Resource
dspfarm profile 1 conference
codec g729r8
maximum sessions 2
associate application SCCP
! # Specify where to register conference resources with
sccp local GigabitEthernet0/0.500
sccp ccm identifier 1 priority 1 version 7.0
! # Create SCCP resource group to register with above location
sccp ccm group 1
bind interface GigabitEthernet0/0.500
associate ccm 1 priority 1
associate profile 1 register CONFERENCE
connect retries 20
connect interval 1
switchback method immediate
! # Allow DSP (conference resources to be registered with this CME
sdspfarm units 2
sdspfarm tag 1 CONFERENCE
conference hardware
voice register global
conference hardware

! # Create Meetme DN as ephone-dn and add Meetme button to SIP phone,.
ephone-dn  10  octo-line
number 5002222
label Meetme Conf.
name Meetme Conf.
conference meetme
voice register pool  1
feature-button 4 MeetMe
conference admin

On phone, press MeetMe button then dial 5002222 to create conference, conference creator should have “conference admin” configured. Other phones may then join dialling 5002222 only.

Show Commands

sh sccp
sh voice dsp voice
sh voice call
sh voice dsp detailed

sh call active voice brief

sh dspfarm all

sh dsp-group all
sh dsp-group voice all

Simon Birtles

I have been in the IT sector for over 20 years with a primary focus on solutions around networking architecture & design in Data Center and WAN. I have held two CCIEs (#20221) for over 12 years with many retired certifications with Cisco and Microsoft. I have worked in demanding and critical sectors such as finance, insurance, health care and government providing solutions for architecture, design and problem analysis. I have been coding for as long as I can remember in C/C++ and Python (for most things nowadays). Locations that I work without additional paperwork (incl. post Brexit) are the UK and the EU including Germany, Netherlands, Spain and Belgium.